Feb 4th, 2016
Paper templates seem a bit to floppy to use in a practical way. I am afraid they would get ruined by the time I finished carving the back and soundboard. I cut the out graduations from the manual and used rubber
cement to glue each one to a thin 1/8” piece of scrap I had laying around.
I used a band-saw to cut each one out and
then used a spindle sander attached to my drill press to sand to the line.
I labeled each one according to the manual. I now have 20 graduation templates that should last quite awhile.
 |
| Paper templates |
 |
| Sanding to size |
 |
| 20 Graduation Templates |
No comments:
Post a Comment